Big Sale Is On - UPDATED 03-26-26
The Big Sale is on but not like originally planned, it is a by appointment type of thing now. Be sure to call before you come to make sure the day isn't already full with peeps scheduled to come in, and make sure what you want is still available.
Making more room for parts
- Geno
-
Topic Author
- Online
- Administrator Supporter
-

Super Users
- Wheel Horse Stables Owner
Less
More
10 Nov 2026 17:54 - 10 Nov 2026 18:18 #19207
by Geno
Replied by Geno on topic Making more room for parts
It was 75 and sunny today, and will be the same tomorrow so we shifted gears again, what else is new... Still, a lot of progress today.
The Air Horse tug, wheel weights + chains went where the engine covers were. All of the covers on both pallets only took up 3 shelves if it was all put close together. I did find another cart with more covers full of parts on it but there's plenty of room up there. They will get moved up there tomorrow. There's also another cart full of Onan covers in the back, they will go up on the new shelves as well. I'm trying to get a lot of light stuff on the outer shelves toward the top where it's a little safer to get to.
2 more pallets were pulled off of the shop pallet racks, one with dash type stuff and another just had my mid mount grader and aerator on it. That made room for a pallet with 9 small blocks to go at the top next to a pallet with 9 big blocks on it. The dash stuff is also going up on the new shelves tomorrow.
The belt guards were put up on the rack/shelf this morning to get them out of the way. They are taking up a lot of space but are all organized by type. There are a ton of them loose around here and in the lot I need to move inside so the shelves will end up filled.
Even after all of that is done there will still be a lot of empty shelves up there so it's working out super nice.
The Air Horse tug, wheel weights + chains went where the engine covers were. All of the covers on both pallets only took up 3 shelves if it was all put close together. I did find another cart with more covers full of parts on it but there's plenty of room up there. They will get moved up there tomorrow. There's also another cart full of Onan covers in the back, they will go up on the new shelves as well. I'm trying to get a lot of light stuff on the outer shelves toward the top where it's a little safer to get to.
2 more pallets were pulled off of the shop pallet racks, one with dash type stuff and another just had my mid mount grader and aerator on it. That made room for a pallet with 9 small blocks to go at the top next to a pallet with 9 big blocks on it. The dash stuff is also going up on the new shelves tomorrow.
The belt guards were put up on the rack/shelf this morning to get them out of the way. They are taking up a lot of space but are all organized by type. There are a ton of them loose around here and in the lot I need to move inside so the shelves will end up filled.
Even after all of that is done there will still be a lot of empty shelves up there so it's working out super nice.
Welcome to the Stables!
Last edit: 10 Nov 2026 18:18 by Geno.
Please Log in to join the conversation.
- nappypappy
-
- Offline
- Super Moderator
-

Registered
- poor and in need of a cab..
Less
More
- Posts: 2019
11 Nov 2026 09:25 #19208
by nappypappy
520-H
You can lead a horse to water but you can't make him drink.
I can't see the forest for the trees.
Replied by nappypappy on topic Making more room for parts
WOW looks great but i know i shouldnt be looking, so i cover one eye...
520-H
You can lead a horse to water but you can't make him drink.
I can't see the forest for the trees.
The following user(s) said Thank You: Geno
Please Log in to join the conversation.
- Geno
-
Topic Author
- Online
- Administrator Supporter
-

Super Users
- Wheel Horse Stables Owner
11 Nov 2026 17:55 - 11 Nov 2026 17:58 #19209
by Geno
Replied by Geno on topic Making more room for parts
Thanks Nappy but that is cheating lol.
Another crazy day but we did manage to get a few more things done. First thing was getting my mid mount grader down from the top shelf and getting it to where it would fit on a shelf easier to get to. I've wanted to use it for years but had to move cars to get to it. As you can see in the pics the regular cotter pin was replaced with a hairpin cotter on the handle, then a bolt was replaced with a pin on the swivel adjuster. Now it can go together without tools and be easy to break down for storage. It was also moved near the tire equipment so it's easy to get to.
Next was clearing the pallet (now empty) in the 4th pic full of dash + battery stuff and putting that stuff up on the new shelves. We also made room where that row can be accessed with the forklift. We put some of the 520 wheels up on a pallet for now (7th pic) that were near the tire equipment where the mid mount grader and aerator ended up going.
There's a lot of floor space appearing which was the main objective as far as the shop went. Even with all the parting out lately things are finally falling into place.
The Cobalt even got washed today. It needs a good coat of wax then it will get a car cover on it that's been sitting here for years...
Another crazy day but we did manage to get a few more things done. First thing was getting my mid mount grader down from the top shelf and getting it to where it would fit on a shelf easier to get to. I've wanted to use it for years but had to move cars to get to it. As you can see in the pics the regular cotter pin was replaced with a hairpin cotter on the handle, then a bolt was replaced with a pin on the swivel adjuster. Now it can go together without tools and be easy to break down for storage. It was also moved near the tire equipment so it's easy to get to.
Next was clearing the pallet (now empty) in the 4th pic full of dash + battery stuff and putting that stuff up on the new shelves. We also made room where that row can be accessed with the forklift. We put some of the 520 wheels up on a pallet for now (7th pic) that were near the tire equipment where the mid mount grader and aerator ended up going.
There's a lot of floor space appearing which was the main objective as far as the shop went. Even with all the parting out lately things are finally falling into place.
The Cobalt even got washed today. It needs a good coat of wax then it will get a car cover on it that's been sitting here for years...
Welcome to the Stables!
Last edit: 11 Nov 2026 17:58 by Geno.
Please Log in to join the conversation.
- Geno
-
Topic Author
- Online
- Administrator Supporter
-

Super Users
- Wheel Horse Stables Owner
12 Nov 2026 17:45 #19211
by Geno
Replied by Geno on topic Making more room for parts
My neighbor had some things he had to do today so I started taking apart some more small parts and getting them blasted + cleaned up. I'm way behind on that anyway.
First 2 pics show some of what is still on carts waiting for me, 3rd pic is all the Onan shields that still have to go up on the new shelves. I did get a lot done considering most of it was small parts that had to be taken apart and trying to save everything like the fuel bowls. I got a good start on the mountain of head bolt heavy washers too. It's hard to believe but the big block washers are over $8 a piece, and small block washers are over $5 from Kohler.
I managed to empty 4 of the Cool Whip containers full of small parts over at my operating table today as well...
First 2 pics show some of what is still on carts waiting for me, 3rd pic is all the Onan shields that still have to go up on the new shelves. I did get a lot done considering most of it was small parts that had to be taken apart and trying to save everything like the fuel bowls. I got a good start on the mountain of head bolt heavy washers too. It's hard to believe but the big block washers are over $8 a piece, and small block washers are over $5 from Kohler.
I managed to empty 4 of the Cool Whip containers full of small parts over at my operating table today as well...
Welcome to the Stables!
Please Log in to join the conversation.
- Geno
-
Topic Author
- Online
- Administrator Supporter
-

Super Users
- Wheel Horse Stables Owner
13 Nov 2026 17:24 #19214
by Geno
Replied by Geno on topic Making more room for parts
Still plenty of room on the new shelves and rack/shelf so next step is doing some cleaning, moving, rearranging, and getting caught up on putting things away. As you can see in the pic there's still 3-4' 3 shelf carts to deal with along with a lot of other things to do something with... That will begin next Monday, I have something else planned for tomorrow.
Welcome to the Stables!
Please Log in to join the conversation.
- Geno
-
Topic Author
- Online
- Administrator Supporter
-

Super Users
- Wheel Horse Stables Owner
16 Nov 2026 17:15 - 16 Nov 2026 17:17 #19220
by Geno
Replied by Geno on topic Making more room for parts
Got all of the Onan shields, covers, and lighter type parts up on the new shelves today. Dipsticks go in a Fastenal drawer in the back engine section. Not sure where flywheels + stators will go yet. Everything adds up and it's getting heavy up there so not putting a lot of heavier or cast iron parts up there any more unless it's toward the very ends (front + rear where the posts are).
Welcome to the Stables!
Last edit: 16 Nov 2026 17:17 by Geno.
Please Log in to join the conversation.
Time to create page: 0.154 seconds